PLLC UPB Appliance Dimmer Module are a 250 Watt 240 Volt 50 Hz device. Suitable for controlling 3rd part devices e.g. Electric Blanket….Fan…etc  …see list below of 3rd part device wattages to be used as a guide only. Care should be taken to confirm your device Wattage usage.

..”ENSURE THAT YOUR UPB APPLIANCE DIMMER MODULE IS SET TO SNAP ON AND SNAP OFF”…THIS IS CRITICAL!.

For control “OFF and ON” of devices which have a higher wattage than 250 watts, it is recommended that a PLLC UPB Appliance Relay is used….see section under “Appliance Relay”

 

APPLIANCE	WATTAGE	UPB Appliance Dimmer Yes/No
Aquarium	80	YES
Clock radio	10	YES
Coffee Maker	1050	NO
Washing Machine	425	NO
Cloths Dryer	3400	NO
Dishwasher	1800	NO
dehumidifier	785	NO
Electric Blanket single	60	YES
Electric Blanket double	100	YES
Ceiling Fan	120	YES
Fan	153	YES
Hair Dryer	1538	NO
Heater	1125	NO
Cloths Iron	1400	NO
Heater	1125	NO
Microwave Oven	925	NO
Refrigerator	725	NO
Television 19"	110	YES
Television 27"	113	YES
Television 36"	133	YES
Television (51- 61)	170	YES
Television Flat screen )	120	YES
Toaster	1100	NO
Toaster Oven	1225	NO
VCR	19	YES
DVD	23	YES
Vacuum Cleaner	1220	NO
Water Heater	5000	NO
Water Pump	675	NO
Water Bed (w/heater)	250	YES
computer	270	NO
Radio	400	NO

Prior to placing in Setup Mode, it is recommended to always “Default” the unit.
1.    Press the UP Button 5 times…. LED begins to flash GREEN …
2.    Press the DOWN button 10 times… LED now starts to Flash RED
3.    Then Press the UP button 2 times…LED stops flashing….the Unit has now be defaulted
4.    Now place to unit in Setup Mode …Press UP button 5 times, to put device into Setup Mode….LED starts flashing GREEN
5.    By using the UPSTART Software, downloaded from the PLLC Web site, you can now discover your UPB device and place or create your NEW Network

6.    The UPSTART Wizard can provide a Step by Step procedure for installation